trunk/udev/udev-hotplug.rules.magellan

# /etc/udev/rules/80-hotplug.rules:  module loading rules for udev
# $Header: /root/magellan-cvs/src/udev/udev-hotplug.rules.magellan,v 1.1 2007-08-17 20:07:19 niro Exp $
#
# There are a number of modifiers that are allowed to be used in some
# of the different fields. They provide the following subsitutions:
# %n - the "kernel number" of the device.
#      For example, 'sda3' has a "kernel number" of '3'
# %k - the kernel name for the device.
# %M - the kernel major number for the device
# %m - the kernel minor number for the device
# %b - the bus id for the device
# %c - the string returned by the PROGRAM. (Note, this doesn't work within
#      the PROGRAM field for the obvious reason.)
# %s{filename} - the content of a sysfs attribute.
# %% - the '%' char itself.
#
# Try not to modify this file, if you wish to change things, create a new rule
# file that can be run before this one.
#

# Module autoloading
ACTION!="add", GOTO="hotplug_load_end"

# check if the device has already been claimed by a driver
ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"

# this driver is broken and should not be loaded automatically
SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"

# Autoload modules that lack aliases but have them defined in autoload modules
ENV{MODALIAS}=="?*", RUN{ignore_error}+="modprobe.sh $env{MODALIAS}"

# /etc/modprobe.conf.
SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
# needed aliases are defined in /etc/modprobe.d/pnp-aliases


SUBSYSTEM=="i2o",  RUN+="modprobe.sh i2o_block"
SUBSYSTEM=="mmc",  RUN+="modprobe.sh mmc_block"
SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_sd"
SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_ms"
SUBSYSTEM=="ide",  ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"

# Load driver for scsi-device
SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"

	# Parts taken from redhat-rules
	# sd:           0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
	# sr:           4 TYPE_WORM, 5 TYPE_ROM
	# st/osst:      1 TYPE_TAPE

	ATTRS{type}=="?*",	TEST!="[module/sg]", RUN+="modprobe.sh sg"
	ATTRS{type}=="0|7|14",	RUN+="modprobe.sh sd_mod"
	ATTRS{type}=="4|5",	RUN+="modprobe.sh sr_mod"
	ATTRS{type}=="8",	RUN+="modprobe.sh ch"

	ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
		ATTRS{model}!="ADR*", RUN+="modprobe.sh osst", GOTO="hotplug_scsi_end"
	ATTRS{type}=="1", RUN+="modprobe.sh st"
LABEL="hotplug_scsi_end"

LABEL="hotplug_load_end"
1	niro	292	# /etc/udev/rules/80-hotplug.rules: module loading rules for udev
2			# $Header: /root/magellan-cvs/src/udev/udev-hotplug.rules.magellan,v 1.1 2007-08-17 20:07:19 niro Exp $
3			#
4			# There are a number of modifiers that are allowed to be used in some
5			# of the different fields. They provide the following subsitutions:
6			# %n - the "kernel number" of the device.
7			# For example, 'sda3' has a "kernel number" of '3'
8			# %k - the kernel name for the device.
9			# %M - the kernel major number for the device
10			# %m - the kernel minor number for the device
11			# %b - the bus id for the device
12			# %c - the string returned by the PROGRAM. (Note, this doesn't work within
13			# the PROGRAM field for the obvious reason.)
14			# %s{filename} - the content of a sysfs attribute.
15			# %% - the '%' char itself.
16			#
17			# Try not to modify this file, if you wish to change things, create a new rule
18			# file that can be run before this one.
19			#
20
21			# Module autoloading
22			ACTION!="add", GOTO="hotplug_load_end"
23
24			# check if the device has already been claimed by a driver
25			ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end"
26
27			# this driver is broken and should not be loaded automatically
28			SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end"
29
30			# Autoload modules that lack aliases but have them defined in autoload modules
31			ENV{MODALIAS}=="?*", RUN{ignore_error}+="modprobe.sh $env{MODALIAS}"
32
33			# /etc/modprobe.conf.
34			SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN{ignore_error}+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'"
35			# needed aliases are defined in /etc/modprobe.d/pnp-aliases
36
37
38			SUBSYSTEM=="i2o", RUN+="modprobe.sh i2o_block"
39			SUBSYSTEM=="mmc", RUN+="modprobe.sh mmc_block"
40			SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_sd"
41			SUBSYSTEM=="tifm", RUN+="modprobe.sh tifm_ms"
42			SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi"
43
44			# Load driver for scsi-device
45			SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end"
46
47			# Parts taken from redhat-rules
48			# sd: 0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC
49			# sr: 4 TYPE_WORM, 5 TYPE_ROM
50			# st/osst: 1 TYPE_TAPE
51
52			ATTRS{type}=="?*", TEST!="[module/sg]", RUN+="modprobe.sh sg"
53			ATTRS{type}=="0\|7\|14", RUN+="modprobe.sh sd_mod"
54			ATTRS{type}=="4\|5", RUN+="modprobe.sh sr_mod"
55			ATTRS{type}=="8", RUN+="modprobe.sh ch"
56
57			ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \
58			ATTRS{model}!="ADR*", RUN+="modprobe.sh osst", GOTO="hotplug_scsi_end"
59			ATTRS{type}=="1", RUN+="modprobe.sh st"
60			LABEL="hotplug_scsi_end"
61
62			LABEL="hotplug_load_end"